B4BY.588

: / proc / self / root / etc / rdma /
Filename : sriov-vfs
back
# All lines in this file that start with a # are comments,
# all other lines will be processed without argument checks
# Format of this file is one sriov vf setting per line with
# arguments as follows:
#    vf [port #] [ethernet settings | infiniband settings]
#
#  @vf - PCI address of device to configure as found in
#	  /sys/bus/pci/devices/
#
#  [port @port] - Optional: the port number we are setting on
#         the device.  We always assume port 1 unless told
#         otherwise.
#
#  Ethernet settings:
#  mac <mac address> [additional options]
#    @mac - mac address to assign to vf...this is currently required by
#        the ip program if you wish to be able to set any of the other
#        settings.  If you don't set anything on a vf, it will get a
#        random mac address and you may use static IP addressing to
#        have a consistent IP address in spite of the random mac
#    @* - additional arguments are passed to ip link without any
#      further processing/checking, additional options that could
#      be passed as of the time of writing this are:
#        [ vlan VLANID [ qos VLAN-QOS ] ]
#        [ rate TXRATE ]
#        [ spoofchk { on | off} ]
#        [ state { auto | enable | disable} ]
#
#  InfiniBand settings:
#  [guid <guid>] [pkey <space separated list of pkeys>]
#    @guid - 64bit GUID value to assign to vf.  Omit this option to
#          use a subnet manager assigned GUID.
#    @pkey - one or more pkeys to assign to this guest, must be last
#          item on line
#
#  Examples:
#
#    0000:44:00.1 guid 05011403007bcba1 pkey 0xffff 0x8002
#    0000:44:00.1 port 2 mac aa:bb:cc:dd:ee:f0 spoofchk on
#    0000:44:00.2 port 1 pkey 0x7fff 0x0002
#    0000:44:00.2 port 2 mac aa:bb:cc:dd:ee:f1 vlan 10 spoofchk on state enable